Skip to content
MIDWESTCDJR

Jeep Renegade · Model year 2020 · No longer built

2020 Jeep Renegade specs, maintenance & manuals

Everything the manufacturer published about the 2020 Jeep Renegade in one place: the factory spec sheet, the maintenance schedule, fluid capacities and 12 manufacturer publications, and towing ratings up to 2,000 lb.

Max towing
2,000 lb
Schedule covers
150k miles
Publications
12

2020 Jeep Renegade specs & features

Engines, gear ratios, suspension, brakes, dimensions and capacities as published in the manufacturer's 2020 specification sheet.

General information+
Body StyleSport-utility vehicle (SUV)
Assembly PlantMelfi, Italy
EPA Vehicle ClassMultipurpose vehicle
Body and chassis+
LayoutTransverse front engine, 4x2 and 4x4
ConstructionSteel uniframe
Engine: 1.3-liter turbocharged+
AvailabilityStandard — Renegade Limited (4x2 and 4x4) and Trailhawk Optional — Sport and Latitude (4x2 and 4x4)
Type and DescriptionIn-line four-cylinder, liquid-cooled, turbocharged
Displacement1332 cu. in. (cc)
Bore x Stroke70mm x 86.5mm
Valve SystemSOHC & hydraulic valve actuation
Fuel InjectionDirect injection
ConstructionAluminum block and aluminum heads
Compression Ratio10.5
Maximum Turbo Boost (psi / bar)2.7 bar
Power (SAE)177hp (132 kW) @ 5,750 rpm
Torque (SAE)210 lb.-ft. (270 N•m) @ 1,750 rpm
Max. Engine Speed6500 rpm (electronically limited)
Fuel Requirement87 octane (R+M)/2 acceptable 91 octane recommended
Oil Capacity4.5 quarts (4.3 liters) with dry filter
Emission ControlsDual three-way catalytic converters, heated oxygen sensors and internal engine features
Fuel Economy (city/hwy/combined)4x2: 24/32/27 4x4: 23 / 29 / 26
Towing2,000 lbs. (907 kg) (not recommended for FWD)
Engine Assembly PlantBielsko-Biała, Poland
Engine: 2.4-liter Tigershark with MultiAir2+
AvailabilityStandard — Renegade Sport and Latitude (4x2 and 4x4)
Type and DescriptionIn-line four-cylinder, 16-valve MultiAir with multiport fuel injection
Displacement144 cu. in. (2,360 cc)
Bore x Stroke3.46 x 3.82 (88 x 97)
Valve SystemSOHC, four valves per cylinder
Fuel InjectionSequential, multiport, electronic, returnless
ConstructionAluminum block, aluminum cylinder head
Compression Ratio10:1
Power (SAE net)180 hp (134 kW) @ 6,400 rpm
Torque (SAE net)175 lb.-ft. (237 N•m) @ 3,900 rpm
Max. Engine Speed6,400 rpm
Fuel RequirementUnleaded regular, 87 octane
Oil Capacity5.5 quarts (5.2 liters) (total)
Coolant Capacity6.8 quarts (6.45 liters)
Emission ControlsSingle catalytic converter, heated wide band lambda sensor upstream and mid-catalyst heated oxygen sensor
Fuel Economy22 / 30 / 25 (4x2) 21 / 29 / 24 (4x4)
Towing2,000 lbs. (907 kg) (not recommended for FWD)
Engine Assembly PlantDundee Engine Plant, Dundee, Michigan
Transmission: 948TE nine-speed automatic+
Availability1.3-liter Turbo engine, 2.4-liter Tigershark engine with MultiAir2 (4x2 or 4x4)
DescriptionPlanetary gear train, transverse layout
Ratio Spread9.81
1st4.71
2nd2.84
3rd1.91
4th1.38
5th1.00
6th0.81
7th0.70
8th0.58
9th0.48
Reverse3.83
Final-drive Ratio3.734 4.585 (Trailhawk)
Suspension+
FrontMacPherson strut, coil springs, flat front steel crossmember, high-strength steel double shell lower control arms for 4x4 and high-strength steel mono shell lower control arms for 4x2, stabilizer bar
RearChapman strut, high-strength steel links, isolated steel rear cradle for 4x4 and not isolated for 4x2, coil springs, stabilizer bar
Steering+
TypeElectric power rack and pinion
Overall Ratio15.7
Turning Diameter (curb-to-curb)36.3 (11.07) 4x2 and 4x4 35.3 (10.76) Trailhawk 4x4
Steering Turns (lock-to-lock)2.68 (4x2 and 4x4) 2.76 (Trailhawk 4x4)
Brakes+
Front: Size and type12 x 1.1 (305 x 28) vented rotor with 2.36 (60) single-piston floating caliper
Front: Swept area (per caliper)138.77 sq. in. (895.3 sq. cm), 1 x 60 115.88 sq. in. (747.6 sq. cm), 1 x 57
Rear: Size and type10.95 x 0.47 (278 x 12) solid rotor with 1.5 (38) single-piston floating caliper
Rear: Swept area (per caliper)101.7 sq. in. (656.4 sq. cm), 1 x 38
Power-assist Type10 (254) vacuum assist
Four-wheel Anti-lock Brake System (ABS)Standard
Electronic Stability Control (ESC)Standard
Parking Brake TypeElectric motor on caliper
Dimensions and capacities+
Wheelbase101.2 (2,570)
Track, Front60.6 (1,540)
Track, Rear60.6 (1,540)
Overall Length166.6 (4,232)
Overall Width (with folded side mirrors)73.9 (1,886.8)
Overall Width (with open side mirrors)79.6 (2,023.1)
Overall Height66.5 (1,689)
Load-floor Height29.8 (758)
Sill-step Height19.4 (494) front, 19.6 (497) rear
Ground Clearances6.7 (170) 4x2 8.0 (203) 4x4 (8.0 – 203) 8.7 (220) Trailhawk 4x4
Approach Angle (with air dam) (degrees)17.9 4x2 21.0 4x4 30.5 Trailhawk 4x4
Breakover Angle (degrees)21.2 4x2 24.0 4x4 25.7 Trailhawk 4x4
Departure Angle (degrees)29.7 4x2 32.1 4x4 34.3 Trailhawk 4x4
Curb Weight (kg)3,161 (1,438) 4x2 and 1.3-liter Turbocharged 3,320 (1,513) 4x4 and 1.3-liter Turbocharged 3,159 (1,436) 4x2 and 2.4liter Tigershark with MultiAir2 3,323 (1,509) 4x4 and 2.4liter Tigershark with MultiAir2 3,527 (1,602) Trailhawk 4x4 and 1.3-liter Turbocharged
Aero Cd0.35 4x2 0.36 4x4 0.37 Trailhawk 4x4
Fuel Tank Capacity12.7 gal. (48 liters)

The sheet continues this table across pages with no new heading; curb weight, aero Cd and fuel tank capacity follow the angles.

Accommodations+
Seating Capacity — Front/Rear2/3
Front row: Headroom without sunroof41.1 (1,045)
Front row: Headroom with sunroof39.7 (1,009)
Front row: Legroom41.2 (1,046)
Front row: Shoulder room55.9 (1,419)
Front row: Hip room53.1 (1,348)
Front row: Seat travel9.0 (230) driver / 10.2 (260) front passenger
Front row: Recliner range (degrees)From 25 nominal, 38 forward and 30 rearward (from vertical 13 forward, 55 rearward)
Front row: SAE volume (standard roof), cu. ft. (cu. m)54.8 (1.55)
Second row: Headroom40.5 (1,029)
Second row: Legroom35.1 (891)
Second row: Shoulder room55.1 (1,400)
Second row: Hip room51.9 (1,319)
Second row: SAE volume, cu. ft. (cu. m)45.3 (1.28)
Cargo access: Liftover Height30.2 (766)
Cargo access: Maximum cargo width at liftgate opening40.1 (1,020)
Cargo access: Minimum cargo width at liftgate opening39.0 (990) at bottom of opening
Cargo access: Maximum cargo height at liftgate opening29.5 (749)
Cargo access: Minimum cargo height at liftgate opening29.0 (739)
Cargo access: Distance between wheelhouse interior trim37.6 (956)
SAE cargo volume: Rear seats up, cu. ft. (cu. m)18.5 (0.525)
SAE cargo volume: Rear seats folded, cu. ft. (cu. m)50.8 (1.440)
SAE cargo volume: EPA interior volume index, cu. ft. (cu. m)118.6 (3.359)
SAE cargo volume: Behind rear seat, cu. ft. (cu. m)18.5 (0.525) (rear seat at design position)
SAE cargo volume: Behind front-row seats with rear seats Folded, cu. ft. (cu. m)50.8 (1.440)
Tires: 215/65R16+
AvailabilityStandard — Sport / Latitude
Size and type215/65R16 BSW All-season
Mfr. and modelContinental, CrossContact LX Sport
Revs per mile (km)749 (464)
Tires: 215/60R17+
AvailabilityStandard — Latitude (with 2.4-liter Tigershark with MultiAir2)
Size and type215/60R17 BSW All-season
Mfr. and modelContinental, CrossContact LX Sport
Revs per mile (km)768 (478)
Tires: 225/55R18+
AvailabilityStandard — Limited Optional — Latitude
Size and type225/55R18 BSW All-season
Mfr. and modelGoodyear Eagle Sport or Kumho Crugen
Revs per mile (km)729 (452)
Tires: 215/65R17+
AvailabilityStandard on Trailhawk
Size and type215/65R17 OWL All-season
Mfr. and modelFalken WildPeak H/T
Revs per mile (km)722 (448)

Source: 2020 Jeep Renegade Specifications (Stellantis media site).

2020 Jeep Renegade maintenance schedule

The factory schedule for normal driving. Oil changes follow the oil-change indicator on most models; severe use (towing, dusty roads, lots of idling) shortens some intervals.

A dot means the service is due at that mileage or after that many years, whichever comes first. Engines: see schedule title.

Service10k1 yr20k2 yr30k3 yr40k4 yr50k5 yr60k6 yr70k7 yr80k8 yr90k9 yr100k10 yr110k11 yr120k12 yr130k13 yr140k14 yr150k15 yr
Replace the Uconnect box (telematic box) battery (if equipped).The Uconnect box (telematic box) battery replacement has to be done every five years, regardless of mileage.
Check tire condition/wear and adjust pressure, if necessary, check Tire Service Kit expiration date (if equipped).
Check operation of lighting system (headlamps, direction indicators, hazard warning lights, luggage compartment, passenger compartment, glove compartment, instrument panel warning lights, etc.).
Check and, if necessary, top up fluid levels (brakes/hydraulic clutch, windshield washer, engine coolant, etc.).Always only use the liquids shown in the handbook for topping up after having checked that the system is not damage.
Check engine control system operation (via diagnostic tool).
Visually inspect condition of: exterior bodywork, underbody protection, pipes and hoses (exhaust - fuel system - brakes), rubber elements (boots, sleeves, bushings, etc.).
Check windshield/rear window wiper blade position/wear.
Check operation of windshield washer system and adjust jets if necessary.
Check cleanliness of hood and tailgate locks and cleanliness and lubrication of linkages.
Visually check the condition and wear of the front and rear brakes.
Check the front suspension, tie rods, CV joints and replace if necessary.
Visually inspect the condition of the accessory drive belt.The maximum mileage is 75,000 miles (120,000 km). The belt must be replaced every six years, regardless of distance traveled. If the vehicle is used in heavy conditions (dusty areas, cold climates, urban driving, long periods of idling), the maximum mileage is 37,500 miles (60,000 km). The belt must be replaced every four years regardless of the mileage.
Check the tension of the accessory drive belt.
Inspect and replace, if required, front end accessory drive belt, tensioner, and, idler pulley.The maximum mileage is 75,000 miles (120,000 km). The belt must be replaced every six years, regardless of distance traveled. If the vehicle is used in heavy conditions (dusty areas, cold climates, urban driving, long periods of idling), the maximum mileage is 37,500 miles (60,000 km). The belt must be replaced every four years regardless of the mileage.
Inspect and replace PCV valve if necessary.
Change engine oil and replace oil filter.The oil and oil filter replacement must be carried out when indicated by a warning light or message on the instrument panel, or in any case should not exceed one year or 10,000 miles (16,000 km).Always only use the liquids shown in the handbook for topping up after having checked that the system is not damage.If the engine oil quality detected by the vehicle diagnostics is lower than 20%, it is advisable to replace the engine oil and engine filter in order to avoid another service operation after a short time.
Inspect the PTU fluid level.
Inspect the rear differential fluid level.
Replace spark plugs (1.3L Turbo Engine)The spark plug change is distance based only, yearly intervals do not apply. The following are essential to ensure correct operation and prevent serious damage to the engine:Only use spark plugs of the same make and type which are specially certified for such engines (refer to “Fluids and Lubricants” in “Technical Specifications” for further information). Strictly comply with the spark plug replacement interval given in the “Maintenance Schedule” for spark plug replacement. Contact an authorized dealer if you have any questions.
Replace spark plugs (2.4L Engine)The spark plug change is distance based only, yearly intervals do not apply. The following are essential to ensure correct operation and prevent serious damage to the engine: Only use spark plugs of the same make and type which are specially certified for such engines (refer to “Fluids and Lubricants” in “Technical Specifications” for further information). Strictly comply with the spark plug replacement interval given in the “Maintenance Schedule” for spark plug replacement. Contact an authorized dealer if you have any questions.
Replace engine air filter.The engine air cleaner should be inspected at every oil change if used in dusty areas.
Replace brake fluid every two years.The brake fluid change interval is time based only, mileage intervals do not apply.
Replace cabin filter.
Change the manual transmission fluid if using your vehicle for any of the following: trailer towing, heavy loading, taxi, police, delivery service (commercial service), off-road, desert operation or more than 50% of your driving is at sustained speeds during hot weather, above 90°F (32°C).
Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.

At Every Oil Change Interval As Indicated By Oil Change Indicator System

  • Change oil and filter.
  • Inspect battery and clean and tighten terminals as required.
  • Inspect the CV/Universal joints.
  • Inspect brake pads, shoes, rotors, drums, and hoses.
  • Inspect engine cooling system protection and hoses.
  • Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on.
  • Inspect exhaust system.
  • Inspect engine air filter if using in dusty or off-road conditions.

2020 Jeep Renegade fluids & capacities

Oil, coolant, transmission and axle fluids with their capacities and specifications, wheel torque and fuel requirements, from the owner's manual.

Fluid capacities

SystemApplies toUSMetric
Fuel tank (approximate)1.3L Turbo / 2.4L engine12.7 gal48 L
Engine oil with filter1.3L Turbo engine (SAE 0W-30 SN PLUS synthetic, API certified)4.8 qt4.5 L
2.4L engine (SAE 0W-20, API certified)5.5 qt5.2 L
Cooling system1.3L Turbo engine (Mopar 10 Year/150,000 Mile formula)8.8 qt8.3 L
2.4L engine (Mopar 10 Year/150,000 Mile formula)6.8 qt6.5 L

Engine fluids

ComponentFluid / gradeStandardMopar product
Engine coolantOrganic Additive Technology (OAT) 10 Year/150,000 Mile antifreeze/coolant, or equivalentMS.90032Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula
Engine oil (1.3L Turbo engine)SAE 0W-30 synthetic, API SN PLUS certifiedMS-13340—
Engine oil (2.4L engine)SAE 0W-20, API certifiedMS-6395—
Engine oil filterMopar engine oil filter—Mopar Engine Oil Filter
Spark plugsMopar spark plugs—Mopar Spark Plugs

Chassis fluids & lubricants

ComponentFluid / gradeStandardMopar product
Manual transmission (If equipped)Manual and dual dry clutch transmission fluid—Mopar C Series Manual & Dual Dry Clutch Transmission Fluid
Automatic transmission (If equipped)ZF 8 and 9 speed ATF, or equivalent—Mopar ZF 8&9 Speed ATF
Power transfer unit (PTU) (If equipped)SAE 75W-90 synthetic axle lubricant, API GL-5—Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90
Rear differential (RDM) (If equipped)SAE 75W-90 synthetic axle lubricant, API GL-5—Mopar Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90
Brake master cylinderDOT 4 (DOT 3 acceptable if DOT 4 unavailable)—Mopar DOT 4

Fuel

EngineMinimumEthanol / biodiesel
1.3L Turbo engine87 octane Regular unleaded (91 or higher for optimal performance)Up to 15% (E15)
2.4L engine87 octane Regular unleadedUp to 15% (E15)
2.4L Flex Fuel (E-85) engines87 octane Regular unleadedUp to 85% (E85); E85 capable

Wheel lug nut torque

WheelsTorqueThreadSocket
Wheel bolts89 ft-lb (120 N·m)M12 x 1.2517 mm
  • Cooling system capacity includes the heater and the coolant recovery bottle filled to MAX.
  • Engine oil capacities include the filter.
  • Recheck wheel bolt torque after 25 miles (40 km).
  • Tighten wheel bolts in a star pattern, twice around.

Source: Owner's manual on Mopar.com. Always confirm with the manual for your exact vehicle.

2020 Jeep Renegade towing capacity: up to 2,000 lbEvery 2020 tow rating by engine and drive.Open the towing chart →

2020 Jeep Renegade owner's manuals & publications

The manufacturer's owner's manual, quick guides, radio manuals, supplements and warranty booklets for the 2020 model year.

2020 Jeep Renegade questions

How much oil does the 2020 Jeep Renegade take?

With a filter change: 1.3L Turbo engine (SAE 0W-30 SN PLUS synthetic, API certified), 4.8 qt / 4.5 L and 2.4L engine (SAE 0W-20, API certified), 5.5 qt / 5.2 L. Capacities are from the owner's manual; check the dipstick or oil-life display after filling.

What kind of oil does the 2020 Jeep Renegade use?

1.3L Turbo engine: SAE 0W-30 synthetic, API SN PLUS certified (MS-13340); 2.4L engine: SAE 0W-20, API certified (MS-6395); and Engine oil filter: Mopar engine oil filter.

When is the first scheduled maintenance on the 2020 Jeep Renegade?

At 10,000 miles or 1 year: check tire condition/wear and adjust pressure, if necessary, check tire service kit expiration date (if equipped); check operation of lighting system (headlamps, direction indicators, hazard warning lights, luggage compartment, passenger compartment, glove compartment, instrument panel warning lights, etc.); check and, if necessary, top up fluid levels (brakes/hydraulic clutch, windshield washer, engine coolant, etc.).always only use the liquids shown in the handbook for topping up after having checked that the system is not damage; check engine control system operation (via diagnostic tool); visually inspect condition of: exterior bodywork, underbody protection, pipes and hoses (exhaust - fuel system - brakes), rubber elements (boots, sleeves, bushings, etc.); check windshield/rear window wiper blade position/wear, plus 4 more items. Oil changes in between follow the oil-change indicator.

Where can I find the 2020 Jeep Renegade owner's manual?

The manufacturer publishes it free on Mopar.com as a PDF (linked in the manuals section above), along with quick guides, radio manuals and the warranty booklet.

Specifications come from the manufacturer's spec comparison and its media-site specification sheets; maintenance schedules, fluids and publications come from Mopar's owner site and owner's manuals. Equipment and ratings vary by configuration; check the owner's manual or a dealer for a specific vehicle. This model is no longer sold new.